Filter
Top Products
You may need to set supply options when you change supplies.
The options are listed in the table below.
Option Choices Default
Supply Type Aperture/Die Cut/Black
Mark/Continuous
Die Cut
Ribbon No/Yes/High Energy Yes
Speed 2.5/4.0/6.0/8.0/Default Default
Feed Mode Continuous/On-Demand Continuous
Backfeed Off/On/Extended Off
Print Position -99 to 99 0
Supply Position -300 to 300 0
Margin Position -99 to 99 0
Cut Position -300 to 300 0
Dispense Position 50 to 200 65
Backfeed Distance 10 to 200 65
Separators No/Yes/Long No
Skip Index No/Yes No
Knife Control -20 to 20 0
Contrast -699 to 699
To exit an option without changing the setting, press
E.
6-2
Setting Supply Options