Filter
Top Products
Speed
You can change the print speed for bar codes or graphics. If you
select "default" for speed, formats with serial bar codes
automatically print at 2.5 ips and formats with parallel bar codes
print at 6.0 ips. This printer allows cutting 1.2 inch (30 mm) feed
length tags at 8.0 ips; however, optimal cut quality may not be
achieved.
To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press l or r until you see
SUPPLY
l Speed r
2. Press
N to set the speed option. The current setting is
displayed, for example:
SPEED
l Default
3. Press l or r to see the other options. After you display the
option you want, press
N. Press
E until you see the Main
Menu.
For additional high speed printing information,
see Chapter 11, "Printing."
Setting Supply Options
6-5