Filter
Top Products
Flash Storage
Flash storage allows packets (with "R" or "N" selectors) to be
stored in flash memory, instead of volatile RAM. Packets stored
in flash memory are saved when the printer is turned off.
However, flash memory storage is limited.
You must format flash memory before
enabling this option. Formatting flash
memory is only required once during initial
printer setup.
To change the setting, from the Main Menu, select Setup, then
Defaults. Then, follow these steps.
1. Press r until you see
DEFAULTS
l Flash Storage
2. Press
N. The current setting is displayed, for example:
FLASH STORAGE
Disabled r
3. Press l or r until you see the option you want. Then press
N. Press
E until you see the Main menu.
7-8
Setting Defaults