Filter
Top Products
Knife Style: Linear
Tag Cut Dimensions
Widths: 1.0 inches to 4.0 inches (25 mm to 102 mm)
Lengths: 1.5 inches to 16.0 inches (38 mm to 406 mm)
This printer allows cutting 1.2 inch (30 mm)
feed length tags at 8.0 ips; however, optimal
cut quality may not be achieved.
NOTE: The maximum cut tag length using
the stacker is 3.66 inches (93 mm).
Batch Separator: 3.66 inches (93 mm)
Cut Angle: 1 degree (plus or minus) from 90 degrees
with respect to the edge.
Supplies
For high temperature or high humidity environments, contact
Paxar for supply recommendations. Aperture supplies are tags or
labels with holes (or openings) in them. The supply is sensed
using the holes. The holes can be only on the edge or in the
center of the supply.
Center Aperture
Edge Aperture
A-2
Specifications