Filter
Top Products
2. Press
N. The current setting is displayed, for example:
PARITY
None r
3. Press l or r to display the parity you need, then press
N.
Press
E until you see the Main Menu.
Flow Control
To change the setting, from the Main Menu select Setup, Port
Settings, then Serial Comm. Then, follow these steps.
1. Press l or r until you see
SERIAL COMM
l Flow Control r
2. Press
N. The current setting is displayed, for example:
FLOW CONTROL
l DTR r
3. Press l or r to display the flow control you need, then
press
N. Press
E until you see the Main Menu.
XON is 17; XOFF is 19. Set flow control to DTR for PC
computers (unless you have XON/XOFF software).
8-4
Communication Values