Filter
Top Products
Hardware Installation
CP-134U
The Industio CP-134U Series has two 30-pin jumpers and two sets of four DIP Switches
on the board that allow the user to set the serial interface for each of the board’s four ports.
Ports 1 and 2 can be set to RS-232, RS-422, RS-485 (2-wire), or RS-485 (4-wire). Ports 3
and 4 can be set to RS-422, RS-485 (2-wire), or RS-485 (4-wire). Refer to the following
information to determine the proper settings for your board.
Industio CP-134U Series User’s Manual
2-3