Filter
Top Products
Power requirement CP-134U 420 mA max. (+5V)
CP-134UI 700 mA max. (+5V)
CP-134IS 710 mA max. (+5V)
Dimensions CP-134U 120 × 80 mm (W × D)
CP-134UI 120 × 110 mm (W × D)
CP-134S 120 × 80 mm (W × D)
CP-134IS 120 × 110 mm (W × D)
Operating Systems Windows 95/98/NT/2000/XP, Linux
PCI
The 32-bit Industio CP-134U Series board complies with PCI Specifications 2.1. The IRQ
and I/O address hardware configuration is automatically assigned by the PCI BIOS. This
means that you must first plug in the board before installing the driver software.
As opposed to ISA slots, different PCI slots in the same PC may have different bus
numbers and device numbers with respect to the PCI specifications. The same PCI board
will have different system configurations if switched to a different PCI slot; this is called
slot-sensitive or slot-dependent. This may also apply to PCI slots in a PC with a different
motherboard, which may use different device number sets. For example, some use 17, 18,
19, and 20 for identifying the respective PCI slots, but some use 11, 12, 13 and 14.
Due to slot-dependency, it is necessary to re-configure the driver software once the
board is plugged into different PCI slots.
Up to 4 Industio CP-134U Series boards are allowed in one system. When installing more
than one board, please remember the order the boards are installed to distinguish the
installed boards from each other.
Industio CP-134U Series User’s Manual
A-2