Filter
Top Products
msdiag Diagnostic program for displaying installed Moxa Smartio/Industio boards.
msmon Monitoring program to observe data count and line status signals.
msterm A simple terminal program which is useful when testing serial ports.
io-irq.exe Configuration program for setting up ISA boards. Please note that this program
can only be executed under DOS.
The source code for all of these drivers and utilities are published under GNU General
Public License. Please refer to the GNU General Public License announcement in each
source code file for more detail.
You may always find the latest Moxa drivers at www.moxa.com or www.moxa.com.tw.
This version of the driver can be installed as a Loadable Module (Module driver) or built
into the 1kernel (Static driver). You may refer to the following installation procedure to
determine which method is suitable for you. Before you install the driver, please refer to the
hardware installation procedure in the User's Manual.
We assume the user is familiar with the following documents.
Serial-HOWTO
Kernel-HOWTO
System Requirements
Hardware platform: Intel x86 machine
Kernel version: 2.0.3x or 2.2.x or 2.4.x
gcc version 2.72 or later
A maximum of 4 boards can be installed in combination
Installation
Hardware Installation
The Smartio/Industio family multiport boards come in two different bus types: ISA and
PCI.
PCI board
You may need to adjust IRQ usage in the BIOS to avoid an IRQ conflict with other ISA
devices. Please refer to the hardware installation procedure in the User's Manual before
Industio CP-134U Series User’s Manual
3-38