Filter
Top Products
Software Installation
10. When you have finished the configuration, click on the [Close] button in the “Network
Settings” dialog box.
11. Restart the Windows NT system. The new configuration will take effect when the
system restarts.
Note ! The latest configuration will not take effect unless the system restarts.
12. Once the system restarts, you may check the event log issued by the MOXA driver to
see if the board’s ports have been initialized successfully.
Enter the [Administrative] group, click on the [Event Viewer] icon and select
[System Event Log] to check a message similar to “MOXA CP-134U, with first
serial port COM3, has been enabled” for each configured board.
If an error message similar to “Cannot find any configured MOXA CP-134U
board!” appears, refer to the “Troubleshooting” chapter for solutions.
Industio CP-134U Series User’s Manual
3-7