Filter
Top Products
Software Installation
You may use this configuration panel to:
Click on [Property] to enter the “Property” dialog box to configure the selected
board with the correct “COM Number,” “Rx FIFO Trigger,” and “Tx FIFO Size.”
See Steps 8 and 9 in the previous section, “Installing the Driver,” for more details.
Click on [Add] to add one more board that has not yet been configured for the
system. See Steps 6 to 9 in the previous section, “Installing the Driver,” for more
details.
To automatically remove the configuration, simply unplug the CP-134U Series
board—after you turn off your PC. There is no need to use the remove board
function from the Moxa Smartio/Industio Configuration Panel dialog box.
Click [OK] to confirm the configuration changes that you’ve made.
Click on [Cancel] to close the window without changing the configuration.
Updating the Driver
To update the driver for the Industio CP-134U Series board, simply remove the driver, as
described in the next section, and reinstall it as detailed in the section, “Installing the
Driver.”
Industio CP-134U Series User’s Manual
3-9