Filter
Top Products
Configuring the Board and Ports
Follow the procedure given below if you would like to reconfigure the COM numbers of
ports for boards that are already installed under Windows 95/98.
Since this is a PCI board, once the board is added or unplugged, the configuration will be
automatically added or removed by the system.
1. Open the [Control Panel], click on the [System] icon, select the [Device Manager]
tab, and then select Moxa Smartio/Industio multiport board.
2. Click on the desired CP-134U Series board entry, and then click the [Properties]
button to open the CP-134U Series Properties window.
3. Click on the Ports Configuration tab and then select the port whose COM number
Industio CP-134U Series User’s Manual
3-18