Filter
Top Products
Chapter 1 - Introduction and Description
21
1.5 Specifications
The RouteFinder
100
conforms to the following specifications.
• Routing Protocols - IP and IPX and bridging all others
• EtherNet LAN Interface - 10Base-T (twisted pair) or 10Base2 (ThinNet) BNC
• WAN Interface - 3 async or sync Links (RS232C/V.35)
• Command Port - 19.2K bps Asynchronous
• One 4megabyte DRAM (1 meg by 36 byte at 70
Caution: SIMM speed and size can not be mixed.
• 1MB of Flash memory
EtherNet Port
• One Ethernet Interface - 10Base-T (twisted pair) RJ45 (ThinNet) BNC connector
Command Port
• Single 19.2K bps asynchronous Command Port using a short RJ45 to DB25 cable with
a female connector
WAN Link
• 115.2K bps asynchronous WAN link or T1 (1.544Mbps) sync link using DB25 male connector. Optional
ITU-T V.35 interface using a V.35 adapter cable.
Electrical/Physical
• Voltage - 115 VAC (Standard), 240 Volts AC (Optional)
• Frequency - 47 to 63 Hz
• Power Consumption - 10 Watts
• Dimensions -1.625" high x 6" wide x 9" deep
.63cm high x 2.34cm wide x 3.51cm deep
• Weight - 2 pounds (.92 kg)
Requirement
• PC with Windows 3.1x, one serial comm port to connect to the Command Port of the RouteFinder
100