Filter
Top Products
Chapter 5 - RouteFinder Software
55
IPX Port SPX Watchdog Spoofing = [enabled l disabled
You can prevent Novell SPX session alive packets from travelling across the WAN link by enabling this option.
The RouteFinder will generate the necessary data packets to keep sessions alive.
Add A New Network
If Frame Relay is enabled, then it is possiblle to add a new network. To add a new network, click on the WAN
tab in IPX Virtual Port Setup dialog box. The IPX Virtual Port Setup dialog box changes to display the List of
Logical WANs and the Number of Logical WANs, and three new buttons (Add, Delete, and Save Change).
Note: 16 networks it the maximum number of networks.
Delete a Network
If Frame Relay is enabled, then it is possiblle to delete a new network. An existing network can be deleted by
selecting it from the List of Logical WANs and clicking on the Delete button.
Save Change
The Save Change button is avilable only when Frame Relay is enabled and can be used to save changes
made to parameters of a network. To change parameters of a network, select the network from the list of
logical WANs and then change the parameters required and click on the Save Change button.