Filter
Top Products
MTASR1-100 Owner’s Manual
76
IP Protocol Address Based Filtering
In this method, filtering is based on the source and destination IP addresses in the packet.
The Default Action pull down menu defines a received IP packet whose IP address is not found in the filtering
database. This packet will either be filtered or forwarded as set in this field. The default setting for this option
is Forward.
The filtering entries list (Type, Port, and IP Address) lists the currently established IP filters in the RouteFinder
database. The first column shows the type of filter(e.g., Filter on Source Address being equal or forward on
destination address being equal, etc.). The second column lists the physical port on which the filter is
applicable. The third column shows the IP address for which we need the filtering.
To add an IP Address Filter, the Add IP Address Filter dialog box is displayed that lets you add a new entry to
the IP filtering database.
IP Address IP address for filtering or forwarding
Physical Port LAN or WAN 1
Filter Type
Filter on Destination Address - Drop all IP packets whose whose destination IP address matches the IP
address entered in the above field.
Filter on Source Address - Drop all IP packets whose source IP address matches the IP address entered in
the above field.
Forward on Destination Address - Forward all IP packets whose destination IP address matches the IP
address entered in the above field.
Forward on Source Address - Forward all IP packets whose source IP address matches the IP address
entered in the above field.