Filter
Top Products
MTASR1-100 Owner’s Manual
46
5.2.4 Other Setup
SNMP
This button selects the Simple Network Management Protocol (SNMP) setup.
Applications
This button selects the setup for the Telnet server, TFTP server, a World Wide Web server, or the Async
Gateway server built into the RouteFinder. A dumb terminal can be connected to the command port for
configuration and management of the RouteFinder.
Filtering
This button selects the filtering of various protocol packets.
5.2.5 Actions
Diagnostics
A limited set of hardware diagnostics are available through this button. It is also possible to test the
communication link.
If the RouteFinder is running, it will have to be rebooted before diagnostics can be performed. (You will be
queried before doing so.)
Print Console
Displays the print messages received from the target device.
Download Setup
You can update the RouteFinder setup on the target. This will bring the RouteFinder down for updating the
setup. Then, reboot the RouteFinder.
Router Version
The current version number of the RouteFinder firmware is displayed in this field.
Router Status
The current status of the router is displayed in this box, if setup was able to communicate with the target.
When the Setup program comes up and no “Dial String” is specified, it will automatically check for the
presence of a target. If a dial string is present, you will need to be explicit. Refer to the Owner's Manual of the
WAN device for dialing information.
Help
A thorough On-line Help sytem is provided with abbreviated information on the dialog boxes and the buttons
within a dialog box.
Exit
This will end your RouteFinder session and return you to the Program Manager.