Filter
Top Products
Just in case …
3.14
5.
Open the inner cover.
Important: You must hold the cover open. It won’t stay open by itself.
6.
Use the cloth with the rollers
cleaner to clean the face of
the rollers. Rotate the rollers
by hand to allow cleaning of
the entire roller surface.
7.
Use the cloth with isopropyl
alcohol to clean the contact glass.
Important: You must hold the
cover open. It won’t
stay open by itself.
8.
Gently close the scanner cover,
making sure both sides are snapped
down securely.
Cleaning the
FBS
1.
Open the book cover.
2.
Get a soft, lint-free cloth and moisten it with isopropyl alcohol.
Important: Make sure the cloth doesn’t
have any rough areas.
Otherwise, it could scratch the
glass surface of the
FBS
.
3.
Using the cloth, gently clean the glass
surface of the
FBS
and the white background
area on the underside of the book cover.
If you have unsatisfactory printout quality
Your machine automatically cleans its charger and transport roller, two items which
are very important to printout quality. So, if you notice poor printout quality (whether
on received faxes or on copies), it may mean that your machine requires service.
Review “Print quality problems” (pages 3.5–3.6), and see whether any of the proposed
solutions helps your machine. If none do, please call your authorised Muratec dealer.
Cleaning the
LED
print head
If you find your fax recipients complaining that the faxes you receive or copy image
quality are streaked, the
LED
print head may be dirty.
1.
Turn off your fax machine.
2.
Get a soft, lint-free cloth and
moisten it with isopropyl
alcohol.
3.
Open the top cover and then
open the printer cover.
CAUTION
!
:
The fuser unit becomes very hot.
Do not
touch the fuser unit when you are cleaning the
LED print head.
4.
Using the cloth, gently clean the
LED
print head.
Note: Do not use abrasive materials on the
LED
print head.
Storing the toner and drum cartridge(s)
Follow these guidelines when you store the machine’s toner and drum cartridges.
• Do not unpack a cartridge until you are ready to install it.
• Store cartridges at a constant temperature within a range of 23º to 95º
F
. (-5º to 35º
C
.), as well as a humidity range of 10% to 80%.