Filter
Top Products
Beyond the basics
2.47
5.
Depending on whether you already have a number entered into the blocked
numbers list, the display shows one of the following:
Enter Fax Number
01:_
or
Select BlockJunk No.
01:555-2208
If you have not entered a fax number into this slot in the list, skip to step 7.
Otherwise, proceed to step 6.
6.
If you wish to modify an existing entry in the blocked numbers list, press
or repeatedly until you see the number you wish to modify.
… or …
If you wish to enter a new number in an already-started blocked numbers list,
press
or repeatedly until you find an empty position in the list (as in the
first display in step 5).
Note: To clear a number from the list, see “Clearing a number from the
blocked numbers list,” right column.
7.
Use the numeric keypad to enter the last eight characters of a fax number you
wish to block. For example, if you wish to block a fax from someone with a
Subscriber id of 972-555-3038, you should enter
5, 5, 5, -, 3, 0, 3, 8
:
Enter Fax Number
01:555-3038
To change only a specific digit of an entry, press to move leftward or to
move rightward until the cursor is under the digit, then use the numeric keypad
to enter the correct digit.
8.
Press
ENTER
to save the setting. The display will show the next “slot” in the
blocked numbers list.
Enter Fax Number
02:_
If you do not wish to enter or change a fax number, proceed to step 9.
If you do wish to enter another fax number, repeat steps 5–8.
9.
Press
STOP
. The display now asks whether you want to print blocked numbers
list.
Print BlockJunk Dial
Enter/Stop
10.
If you do want to print the list, press
ENTER
and your machine will print it.
If you don’t want to print a list, press
STOP
and your machine will return to
normal standby mode.
Clearing a fax number from the blocked numbers list
To clear a number from the list.
1.
If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
COPY
/
FAX
to change to Fax mode.
2.
Press
PROGRAM
,
J
,
1
,
1
,
ENTER
. The display shows the current Block Junk
Fax setting:
Block Junk Fax:Off
Program/Enter
If the setting is either Mode 2 or Mode 3, skip to step 4.
If the setting is either Off or Mode 1, proceed to step 3.
3.
Press
PROGRAM
until your see your preference, Mode 2 or Mode 3.
In this example, we’ve chosen Mode 2.
Block Junk Fax:Mode2
Program/Enter
4.
Press
ENTER
twice. The display shows:
Select BlockJunk No.
01:555-0911
If this is the fax number you wish to clear from the list, skip to step 6.
Otherwise, proceed to step 5.
5.
Press
PROGRAM
repeatedly until you see the number you wish to clear from
the list.
6.
Press
CANCEL
to clear the number.
To clear another number from the blocked numbers list, repeat steps 5–6.
Otherwise, proceed to step 7.
7.
Press
STOP
. The display now asks whether you wish to print the current
blocked numbers list:
Print BlockJunk Dial
Enter/Stop
If you want to print the list, press
ENTER
and your fax machine will print it.
Otherwise, press
STOP
to return your machine to its normal standby mode.