Filter
Top Products
Using the EISA Configuration Utility
NCR S26 Hot Plug Server User Guide 5-17
To view or edit your configuration, select “Step 3: View or edit details” from
the main menu and press Enter to display the screen as shown in the figure
below.
Figure 5-8. View or Edit Details
Step 3: View or edit details
16 MB System Memory
64 MB System Memory
128 MB System Memory
192 MB System Memory
256 MB System Memory
320 MB System Memory
384 MB System Memory
448 MB System Memory
512 MB System Memory
8
16
64
128
192
256
320
384
448
-
-
-
-
-
-
-
-
-
....8MBsystemMemory
....Disabled
....Disabled
....Disabled
....Disabled
....Disabled
....Disabled
....Disabled
....Disabled
System - NCR 3426 Server
System BIOS Type
System Processor
Special System Ports
EISA Reserved Devices
System Memory Functions
Base System Memory
RAM BIOS Enable (128 K)
Pentium at 166 MHz
Special System Ports
EISA Reserved Devices
Enabled
................
................
..............
............
...........
Mouse Port
Keyboard Port
Floppy Disk Controller
IDE HDD Interface
Parallel Port
Serial Ports
Select COM1 Port Address
Select COM2 Port Address
Enabled
Enabled
Enabled
Enabled
Enabled as LPT1 (3BCh)
3F8h
2F8h
......................
...................
.............
................
.....................
.......
.......
Edit = ENTER <Edit Resources = F6> <Advanced = F7> <Done = F10>
Press and to see all information.
Press F10 when you have finished this step.
Press F6 to edit its resources (IRQs, DMAs, I/O ports, or memory).
Press ENTER to edit the functions of the highlighted item.
See the next page for continuation of the above screen.