Filter
Top Products
Opening the System
NCR S26 Hot Plug Server User Guide 2-9
To open the system, follow these steps:
1. Open the top front cover by pressing the indentation.
2. Open the lower front panel by pulling on the right side, at the indentation.
3. Unlock the housing, using the key.
Figure 2-6. Opening the Cabinet Housing
Note: You can not remove the key after you have unlocked the housing. You
can remove it only when you lock the housing again.
4. Pull on the key to swing the left side of the housing open. If necessary,
you may use a screwdriver gently to pry the side of the housing open.