Filter
Top Products
Setting Hard Disk ID Options
NCR S26 Hot Plug Server User Guide D-13
Strapping the SCSI IDs on the Drive
You can use connector J1-A (see Figure D-7) to configure the SCSI IDs. See
the table below.
Table D-3. SCSI Drive ID Settings
SCSI ID Bit3 Bit 2 Bit 1 Bit 0
00000
10001
20010
30011
40100
50101
60110
7* 0 1 1 1
81000
91001
10 1 0 1 0
11 1 0 1 1
12 1 1 0 0
13 1 1 0 1
14 1 1 1 0
15 1 1 1 1
0=Jumper shunt not installed
1=Jumper shunt installed
*SCSI ID7 reserved for SCSI controller board