Filter
Top Products
Entering Setup
NCR S26 Hot Plug Server User Guide 4-3
Entering Setup
CAUTION: Close all open files and leave your application program before
entering Setup. You cannot exit back into an application. The system
automatically reboots when you leave Setup.
Press the key combination Ctrl + Alt + Esc during the power-on self-
test (POST) to enter Setup. The BIOS Utility (Setup) main menu, as shown in
in the figure below appears.
Note: You can only enter Setup during POST. After POST, pressing
Ctrl + Alt + Esc has no effect.
Figure 4-1. BIOS Utility (Setup) Main Menu
BIOS Utility
Basic System Configuration
Advanced System Configuration
PCI System Configuration
Non-PnP ISA Card Configuration
Power Saving Configuration
System Security
Remote Diagnostic Configuration
Load Setup Default Settings
= Move Highlight Bar, = Select, Esc = Exit and Reboot