Filter
Top Products
4-74
No Error Message What to do
4
Failed to run the IPMI
command.
Check the server. A failure may have occurred in BMC.
If you do not find the problem, contact your service representative.
5
Failed to send the IPMI
message.
Check the network environment.
If the network has no problem, contact your service representative.
6
Illegal IPMI message was
requested.
Contact your service representative.
7 Specified target is not present.
Check the server. A failure may have occurred in BMC.
If you do not find the problem, contact your service representative.
Remote KVM Console errors
No Error Message What to do
1
Failed to disable Remote KVM
Console.
Check the network environment and try again.
Contact your service representative if the error persists.
2
Failed to enable Remote KVM
Console.
Check the network environment and try again.
Contact your service representative if the error persists.
3 KVM packet transmission failed.
Check the network environment and server.
If you do not find the problem, contact your service representative.
4 The KVM request was aborted. This is not a problem. Click OK and close the message box.
5 UDP packet transmission failed.
Check the network environment and server.
If you do not find the problem, contact your service representative.
6
Remote KVM console can not
activate because it is disabled.
Make a remote KVM console enable.
See "Remote KVM Console" in Chapter 4.
7
Remote KVM Console is used by
other client.
Try again after the client has finished using Remote KVM Console.
8
Failed to shut down Remote KVM
Console.
Use Remote KVM Console after waiting 3 or more minutes.
9 Failed to make settings.
Check the network environment and try again.
Contact your service representative if the error persists.
10 The UDP connection is closed.
Check the network environment and server.
If you do not find any problem, contact your service representative.
System event logs (SEL) display errors
No Error Message What to do
1
Failed to clear session event logs
of BMC.
The network may be busy. Try again. If the error persists, contact your
service representative because a failure may have occurred in BMC.
2
Failed to acquire system event
logs.
The network may be busy. Try again. If the error persists, contact your
service representative because a failure may have occurred in BMC.
Sensor data records (SDR) display error
No Error Message What to do
1
Failed to acquire sensor data
records.
The network may be busy. Try again. If the error persists, contact your
service representative because a failure may have occurred in BMC.
Field replaceable unit (FRU) information display error
No Error Message What to do
1
Failed to acquire field replaceable
units information.
The network may be busy. Try again. If the error persists, contact your
service representative because a failure may have occurred in BMC.
BMC configuration errors
No Error Message What to do
1 Failed to make settings:
2
Failed to acquire BMC
Configuration:
Check the network environment and try again.
Contact your service representative if the error persists.
3
Used by other software program.
Try again after a while.
Try again after a while.
4 Invalid BMC configuration file. The BMC configuration file may be corrupted. Check the file.