Filter
Top Products
2-19
EXPRESSBUILDER
The CD-ROM that comes with your server contains a setup utility called " EXPRESSBUILDER." When you have first
installed the server or append features to the server, use the EXPRESSBUILDER to set up your server.
Refer to Chapter 6 for details.
The major functions of the EXPRESSBUILDER are:
To install the Operating System.
"Express Setup" helps you to install Windows system. (See Chapter 5)
To diagnose the system.
EXPRESSBUILDER includes the System Diagnostics to check your server. (See Chapter 6)
To create a support disk.
Use this function to create the support disks used to boot the utilities from the floppy disk, or the OEM floppy
disk used for a manual installation of Windows. (See Chapter 6)
To update the BIOS.
Use this function to update the system BIOS or firmware of the server. (See Chapter 6)
To update the Windows System*
"Update Express5800 System" in Master Control Menu (Windows-based EXPRESSBUILDER feature)
updates several resources of Microsoft® Windows Server™ 2003 or Microsoft® Windows® 2000. (See
Chapter 6)
To install the utilities.
EXPRESSBUILDER CD-ROM includes some management software for Windows ( ESMPRO, DianaScope,
etc.) and maintenance utilities for DOS (System diagnostics, Off-line Maintenance Utility, etc.).
You can install the applications for Windows from Master Control Menu and install the utilities for DOS from
Tools menu. (See Chapter 6)
To read the online documents*
You can refer to the online documents from Master Control Menu. (See Chapter 6)
NOTE: Some features among those listed above can be used from the remote computer
via cross cable, modem, or LAN (remote console). See Chapter 6 for details.
* These functions are available under Windows system.