NEC NP-UM352W Projector User Manual


  Open as PDF
of 151
 
121
8. Maintenance
6. Insert the large filter case into the projector cabinet.
 Makesurethattheltercaseisinsertedinthecorrectorientation.
7. Put the small filter case to the projector cabinet.
 Makesurethattheltercaseisinsertedinthecorrectorientation.
8. Put the filter cover back to the projector cabinet.
 Inserttwocatchesofthetipoftheltercoverintothegrooveofthe
cabinet, and push the button to close the filter cover.
• Ifyoundittohardtoclosetheltercover,trypushingthehook.
Button
Hook
Catch
Insiderib
(protrusion)
Thiscompletesthelterreplacement.
Goontotheclearinglampandlterhourmeters.
Toclearthelampusagehoursandthelterusagehours:
1. Place the projector where you use it.
2. Plug the power cord into the wall outlet, and then turn on the projector.
3. Clearthelampusagehoursandthelterusagehours.
1. From the menu, select [RESET] → [CLEAR LAMP HOURS] and reset the lamp usage hours.
2. Select[CLEARFILTERHOURS]andresetthelterusagehours.(→ page 74)
 previous next