Filter
Top Products
8-4
Using External Devices
Serial Devices
To install a serial device such as a printer or an external modem, you need a cable with
a female 9-pin connector.
Note
When you connect a printer or modem, be sure to install the appropriate driver
through the Windows Control Panel.
Follow these steps to connect a serial device to your NEC Versa.
1.
Check that power to both the NEC Versa and the device is off.
2.
Align and connect the 9-pin connector with the serial port on the system. Secure
the connection with the screws provided.
3.
Align and connect the other end of the cable to the appropriate port on the device.
Secure the connections with the screws provided.
Connecting a serial device
4.
Connect the power cable to the device and a properly grounded wall outlet.
5.
Turn on power to the system and the device.
Note
Make sure your device is online before trying to print. See the device specific
guide for instructions.