Filter
Top Products
Using the Operating System and Utilities 4-7
The NEC Customize utility screen consists of the following.
!
A window at the top half of the screen lists the available options.
!
The window below the options list displays a description of each option when the
option is highlighted.
!
The Launch button initiates a selected option when clicked.
!
The More Info button provides an overview of the NEC Customize utility.
!
The Exit button closes the NEC Customize utility.
Using the NEC Customize Utility
Follow these steps to use the NEC Customize utility.
1.
Double click the NEC Customize icon.
2.
From the display window, select the desired option.
3.
Click Launch or Install (Windows 2000/NT) to initiate the selected option.
4.
Follow the on-screen instructions to process the selected option.
For some of the selected options you are prompted to reboot your system.
5.
If necessary, click Exit to close the NEC Customize dialog box.
HDPREPEZ Utility
Using the HDPREPEZ utility automatically configures your NEC Versa’s system’s
save-to-file (STF) area on the hard disk drive.
Note
For more details about the HDPREPEZ utility, see the HDPREPEZ.TXT file in
the NECUTILS/HDPREP directory.
Using HDPREPEZ in Windows 98
In Windows 98, run the HDPREPEZ utility if you increase the memory capacity in
your NEC Versa beyond the factory installed base memory.
Follow these steps to run the HDPREPEZ utility.
1.
Power off and restart your NEC Versa.
2.
At the statement “Starting Windows 98” press
F8
.
3.
From the Startup menu, select the “Safe Mode Command Prompt Only” option.