Filter
Top Products
1-6
Introducing the NEC Versa
!
CD Control Buttons — controls the CD-ROM drive, DVD-ROM drive, or CD
read/write drive (stop, reverse, play/pause, and fast forward). Available on some
systems.
!
Personal Code Buttons — sets a personal code for security. Available on some
systems.
!
Status LEDs — keeps you informed of your NEC Versa VXi’s current operating
status. Descriptions of the status icons appear in the following section.
!
Email Button — accesses your email software.
!
Internet Button — accesses the Internet.
!
Power Button — powers on and off the system.
Note
If you are unable to power off the system, use the power override. Press the
Power button and hold it in place approximately 4 to 5 seconds until the system powers
off.
Power Button
The Power button is a “smart” switch, meaning that it recognizes when the system is in
Standby (Windows 98/2000) or Suspend (Windows NT) mode, if the BIOS parameter
“System Switch” is set to “Sleep.” If in Suspend or Standby mode, you cannot power
off until you press the Power button to resume operation.
Put the unit in Standby or Suspend mode when you need to be away from your system
for a short period of time and want to return to where you left off. Standby mode in
Windows 98/2000 and Suspend mode in Windows NT shuts down all devices in the
system while retaining data and system status.
!
In Windows 98/2000, go to Start, Shutdown, Standby to put your system into
Standby mode.
!
In Windows NT, press the Power button for less than 4 seconds to put your system
into Suspend mode.
!
Use the Power button in the following ways:
— Press the Power button to power on.
— Press the Power button to resume from Standby (Windows 98/2000) or Suspend
(Windows NT) mode and proceed with normal operation.
— Hold the Power button in place for 4 or more seconds to initiate power override
(powers off the system). Only use this option if you cannot power off your
system using Start, Shutdown.