Filter
Top Products
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Switching Commands 7-67
202-10010-01
config dot1x port transmitperiod
This command sets the value, in seconds, of the timer used by the authenticator state machine on
the specified port to determine when to send an EAPOL EAP Request/Identity frame to the
supplicant. The transmit period must be a value in the range of 1 and 65535.
Default 30
Format config dot1x port transmitperiod <slot.port> <1-
65535>
config dot1x port supptimeout
This command sets the value, in seconds, of the timer used by the authenticator state machine on
this port to timeout the supplicant. The supplicant timeout must be a value in the range of 1 and
65535.
Default 30
Format config dot1x port supptimeout<slot.port> <1-65535>
config dot1x port servertimeout
This command sets the value, in seconds, of the timer used by the authenticator on this port to
timeout the authentication server. The server timeout must be a value in the range of 1 and 65535.
Default 30
Format config dot1x port servertimeout <slot.port> <1-65535>
config dot1x port maxrequests
This command sets the maximum number of times the authenticator state machine on this port will
retransmit an EAPOL EAP Request/Identity before timing out the supplicant. The max requests
value must be in the range of 1 and 10.
Default 2
Format config dot1x port maxrequests <slot.port> <1-10>
config dot1x port reauthperiod
This command sets the value, in seconds, of the timer used by the authenticator state machine on
this port to determine when reauthentication of the supplicant takes place. The reauthperiod must
be a value in the range of 1 and 65535.