Filter
Top Products
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
7-50 Switching Commands
202-10010-01
Format show spanningtree cst detailed
Bridge Priority Configured value.
Bridge Identifier
Time Since Topology
Change In seconds.
Topology Change Count Number of times changed.
Topology Change Boolean value of the Topology Change parameter for the switch indicating if a
topology change is in progress on any port assigned to the common and internal
spanning tree.
Designated Root
Root Path Cost Value of the Root Path Cost parameter for the common and internal spanning
tree.
Root Port Identifier Derived value.
Root Port Max Age Derived value.
Root Port Bridge
Forward Delay Derived value.
Hello Time Configured value.
Bridge Hold Time Minimum time between transmission of Configuration Bridge Protocol Data
Units (BPDUs).
CST Regional Root
Regional Root Path Cost
Associated FIDs List of forwarding database identifiers currently associated with this instance.
Associated VLANs List of VLAN IDs currently associated with this instance.
show spanningtree cst port summary
This command displays the status of one or all ports within the common and internal spanning
tree. The parameter <slot.port/all> indicates the desired switch port or all ports.
Format show spanningtree cst port summary <slot.port/all>
MST Instance ID CST
Slot.Port The interface being displayed.
Type Currently not used.
STP State The forwarding state of the port in the specified spanning tree instance.
Port Role The role of the specified port within the spanning tree.
Link Status The operational status of the link. Possible values are “Up” or “Down”.
Link Trap The link trap configuration for the specified interface.