Filter
Top Products
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
7-54 Switching Commands
202-10010-01
config spanningtree mst port priority
This command sets the priority for a specific port within a specific multiple spanning tree instance.
The instance <mstid> is a number that corresponds to the desired existing multiple spanning tree
instance. The <slot.port> is the desired switch port. The priority <value> is a number in the range
of 0 to 240 in increments of 16.
Default 128
Format config spanningtree mst port priority <mstid>
<slot.port> <0-240>
show spanningtree mst summary
This command displays summary information about all multiple spanning tree instances in the
switch.
Format show spanningtree mst summary
MST Instance ID List List of multiple spanning trees IDs currently configured.
For each MSTID:
Associated FIDs List of forwarding database identifiers associated with this instance.
Associated VLANs List of VLAN IDs associated with this instance.
show spanningtree mst detailed
This command displays settings and parameters for the specified multiple spanning tree instance.
The instance <mstid> is a number that corresponds to the desired existing multiple spanning tree
instance ID.
Format show spanningtree mst detailed <mstid>
MST Instance ID
MST Bridge Priority
Time Since Topology
Change Time in seconds.
Topology Change Count Number of times the topology has changed for this multiple spanning tree
instance.
Topology Change in
Progress Value of the Topology Change parameter for the multiple spanning tree instance.
Designated Root Identifier of the Regional Root for this multiple spanning tree instance.
Root Path Cost Path Cost to the Designated Root for this multiple spanning tree instance.
Root Port Identifier Port to access the Designated Root for this multiple spanning tree instance.
Associated FIDs List of forwarding database identifiers associated with this instance.
Associated VLANs List of VLAN IDs associated with this instance.