Filter
Top Products
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Switching Commands 7-71
202-10010-01
Default None
Format config authentication login create <listname>
config authentication login delete
This command deletes the specified authentication login list. The attempt to delete will fail if any
of the following conditions are true:
• The login list name is invalid or does not match an existing authentication login list
• The specified authentication login list is assigned to any user or to the nonconfigured user for
any component
• The login list is the default login list included with the default configuration and was not
created using ‘config authentication login create’. The default login list cannot be deleted.
Format config authentication login delete <listname>
config authentication login set
This command sets an ordered list of methods in the authentication login list. The maximum
number of authentication login methods is three. The possible method values are
local, radius,
and reject.
The value of
local indicates that the user’s locally stored ID and password are used for
authentication. The value of
radius indicates that the user’s ID and password will be authenticated
using the RADIUS server. The value of
reject indicates that the user is never authenticated.
To authenticate a user, the authentication methods in the user’s login will be attempted in order
until an authentication attempt succeeds or fails
.
Note that the default login list included with the default configuration can not be changed.
Default None
Format config authentication login set <listname> <local/
radius/reject> [local/radius/reject] [local/radius/
reject]