Filter
Top Products
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
7-46 Switching Commands
202-10010-01
• Show commands display spanning tree settings, statistics, and other information.
• Config commands configure features and options of the switch. For every config command
there is a show command that displays the config setting.
This section is organized by configuration type:
• System information and statistics commands
• Bridge and CIST commands
• MSTI commands
• Modified commands
• Obsolete commands
show spanningtree summary
This command displays spanning tree settings and parameters for the switch.
Format show spanningtree summary
Spanning Tree Adminmode Enabled or disabled.
Spanning Tree Version Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w, or IEEE
802.1d) based upon the Force Protocol Version parameter.
Configuration Name TConfigured name.
Configuration Revision
Level Configured value.
Configuration Digest Key Calculated value.
Configuration Format
Selector Configured value.
MST Instances List of all multiple spanning tree instances configured on the switch.
config spanningtree adminmode
This command sets the spanningtree operational mode. While disabled, the spanningtree
configuration is retained and can be changed, but it is not activated.
Default disable
Format config spaningtree adminmode <enable/disable>