Filter
Top Products
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Switching Commands 7-73
202-10010-01
config users login
This command assigns the specified authentication login list to the specified user for system login.
The
<user> must be a configured <user> and the <listname> must be a configured login list.
If the user is assigned a login list that requires remote authentication, all access to the interface
from all CLI, web, and telnet sessions will be blocked until the authentication is complete. Refer to
the discussion of maximum delay in the ‘config radius maxretransmit’ and ‘config radius timeout’
commands.
Note that the login list associated with the ‘admin’ user can not be changed to prevent accidental
lockout from the switch.
Format config users login <user> <listname>
show authentication login info
This command displays the ordered authentication methods for all authentication login lists.
Format show authentication login info
Authentication Login List This displays the authentication login listname.
Method 1 This displays the first method in the specified authentication login list, if any.
Method 2 This displays the second method in the specified authentication login list, if any.
Method 3 This displays the third method in the specified authentication login list, if any.
show authentication login users
This command displays information about the users assigned to the specified authentication login
list. If the login is assigned to non-configured users, the user “default” will appear in the user
column.
Format show authentication login users <listname>
User This field displays the user assigned to the specified authentication login list.
Component This field displays the component (User or 802.1x) for which the authentication
login list is assigned.
show dot1x port users
This command displays 802.1x port security user information for locally configured users.
Format show dot1x port users <slot.port>