Filter
Top Products
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
7-28 Switching Commands
202-10010-01
config lag adminmode
This command enables or disables a LAG. The interface is a logical slot and port for a configured
LAG. The option all sets every configured LAG with the same administrative mode setting.
Format config lag adminmode <logical slot.port|all>
<enable|disable>
config lag linktrap
This command enables or disables link trap notifications for the LAG. The interface is a logical
slot and port for a configured LAG. The option all sets every configured LAG with the same
administrative mode setting.
Default enable
Format config lag linktrap <logical slot.port|all>
<enable|disable>
config lag name
This command defines a name for the LAG. The interface is a logical slot and port for a configured
LAG, and name is an alphanumeric string up to 15 characters. This command is used to modify the
name that was associated with the LAG when it was created.
Format config lag name <logical slot.port|all> <name>
config lag deletelag
This command deletes an existing lag from the configuration. The interface is a logical slot and
port for a configured LAG. The all option removes all configured LAGs.
Format config lags deletelag <logical slot.port|all>
config lag stpmode
This command sets the STP mode for a specific LAG. This is the value specified for STP Mode on
the Port Configuration Menu. 802.1D mode is the default. The interface is a logical slot and port
for a configured LAG. The all option sets all configured LAGs with the same option.
Format config lag stpmode <logical slot.port|all>
<off|802.1d|fast>