NETGEAR 7200 Series Network Card User Manual


 
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Switching Commands 7-31
202-10010-01
Default The name for VLAN ID 1 is always Default. The name for other VLANs is
defaulted to a blank string.
Format config vlan name <name> <2-4094>
config vlan makestatic
This command changes a dynamically created VLAN (one that is created by GVRP registration) to
a static VLAN (one that is permanently configured and defined). The ID is a valid VLAN
identification number. VLAN range is 2-4094.
Format config vlan makestatic <2-4094>
config vlan participation
This command configures the degree of participation for a specific interface in a VLAN. The ID is
a valid VLAN identification number, and the interface is a valid interface number or all.
Format config vlan participation <exclude|include|auto> <1-
4094> <slot.port|all>
Participation options are:
include The interface is always a member of this VLAN. This is equivalent to
registration fixed.
exclude The interface is never a member of this VLAN. This is equivalent to registration
forbidden.
auto The interface is dynamically registered in this VLAN by GVRP. The interface
will not participate in this VLAN unless a join request is received on this
interface. This is equivalent to registration normal.
config vlan port tagging
This command configures the tagging behavior for a specific interface in a VLAN. If tagging is
enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is transmitted as
untagged frames. The ID is a valid VLAN identification number. The interface is a valid port
number or all.
Format config vlan port tagging <enable|disable> <1-4094>
<slot.port|all>