Filter
Top Products
Supplemental Information
109
N300 Wireless ADSL2+ Modem Router DGN2200v3
Factory Settings
You can return the modem router to its factory settings. On the bottom of the modem router,
use the end of a paper clip or some other similar object to press and hold the Restore Factory
Settings button
for at least 7 seconds. The modem router resets, and returns to the factory
settings.
Your device will return to the factory configuration settings shown in the following
table.
Table 3. Factory Default Settings
Feature Default Behavior
Router Login User login URL www.routerlogin.com or /www.routerlogin.net
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
co
nnection
WAN MAC address Use default address
WAN MTU size 1492
Port speed Autosensing
Local network
(L
AN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
RIP direction None
RIP version Disabled
RIP authentication None
DHCP server Enabled
Local network
(L
AN) continued
DHCP starting IP address 192.168.0.2
DHCP ending IP address 192.168.0.254
DMZ Enabled or disabled
Time zone GMT for WW except NA and GR, GMT+1 for GR, GMT-8
fo
r NA
Time zone adjusted for daylight
sa
vings time
Disabled
SNMP Disabled
Firewall Inbound (communications coming
in fro
m the Internet)
Disabled (except traffic on port 80, the HTTP port)
Outbound (communications going
out
to the Internet)
Enabled (all)
Source MAC filtering Disabled