Filter
Top Products
Hardware Setup
15
N300 Wireless ADSL2+ Modem Router DGN2200v3
2. Add power to the modem router.
Internet
ADSL
Phone
Line
2
a. Connect the power adapter to the router and plug the power adapter into an outlet.
b. W
ait for the WiFi LED on the front panel to turn on. If none of the LEDs on the front
panel are on, press the Power On/Off button on the rear panel of the modem router.
3. Conn
ect a computer.
You can use an Ethernet cable or connect wirelessly.
Internet
ADSL
Phone
Line
3
• Use the yellow Ethernet cable to connect your computer to an Ethernet port on your
router.
• Or
, connect wirelessly by using the preset wireless security settings located on the
label on the bottom of the router.
4. O
pen a browser.
4