NETGEAR DGN2200V3 Modem User Manual


 
Advanced Settings
98
N300 Wireless ADSL2+ Modem Router DGN2200v3
The following figure shows an example of a repeater mode configuration.
Internet
PCs
Wireless PC
192.168.0.1
AP 1 (parent AP in repeater mode)
AP 3 in repeater mode
Wireless PC
associated
with AP 3
AP 2 in repeater mode
associated
with AP 2
Wireless PC
with AP 1
associated
DGN2200
Figure 11. Repeater example
To set up a repeater with wireless client association:
In this example, the modem router is the base station,
but you can set it up to be the repeater
with another AP as the base station if you want.
1. Set up your mo
dem router to be the base station.
a. In th
e Wireless Repeating Function screen for your modem router, select the Enable
Wireless Repeating Function check box.
b. Select the W
ireless Base Station radio button.
c. Clear th
e corresponding Disable Wireless Client Association check box (make
sure it is not selected).
d. Enter the
MAC addresses for AP 2 and AP 3 in the Repeater MAC Address 1 and
Repeater MAC Address 2 field.
e. Click Apply.
2. Set up AP
2 and AP 3 to be wireless repeaters.
a. In the
Wireless Repeating Function screen for AP 2 and AP 3, select the Enable
Wireless Repeating Function check box.
b. Select the W
ireless Repeater radio button.
c. Clear th
e corresponding Disable Wireless Client Association check box (make
sure it is not selected).
d. Enter the MAC addresses
for your modem router in the Base Station MAC Address
field.
e. Click Apply.
3. V
erify the following for all access points:
Each access po
int operates in the same LAN network address range as the LAN
devices.