Filter
Top Products
Wireless Settings
35
N300 Wireless ADSL2+ Modem Router DGN2200v3
Note: The screen sections, settings, and procedures are explained in the
following sections.
3. Set up and test your computers for wireless connectivity:
a. Use your wireless computer or device to join your network. When prompted, enter the
network password.
b. From the wirelessly connected computer, make sure that you can access the
Internet.
Wireless Settings Screen Fields
Wireless Network
The primary network is the one that you usually use. You can set up guest networks too. You
can customize access so that people who use their computers to access your guest network
can use the Internet, but they do not have access to the rest of your home network.
• Enable SSID Broadcast. This setting allows the modem router to broadcast its SSID so
that a wireless station can display this wireless name (SSID) in its scanned network list.
This check box is selected by default. To turn off the SSID broadcast, clear the Enable
SSID Broadcast check box and click Apply.
• Enable Wireless Isolation. When this check box is selected, wireless stations cannot
communicate with each other or with stations on the wired network. By default, this check
box is not selected.
• Name (SSID). The SSID is also known as the wireless network name. Enter a
32-character (maximum) name in this field. This field is case-sensitive. The default SSID
for your primary network is randomly generated, and there is typically no need to change
it. If you want to set up guest networks, NETGEAR does recommend that you customize
the default guest network names (SSIDs).
• Region. The location where the modem router is used. It might not be legal to operate the
modem router in a region other than the regions listed.
• Channel. The wireless channel used by the gateway: 1 through 13. Do not change the
channel unless you experience interference (shown by lost connections or slow data
transfers). If this happens, experiment with different channels to see which is the best.
• Mode. Up to 150 Mbps is the default and allows 802.11n and 802.11g wireless devices to
join the network. g & b supports up to 54 Mbps. Up to 65 Mbps supports up to 65 Mbps.
Security Options Settings
The Security Options section of the Wireless Settings screen lets you change the security
option and passphrase. The primary network for your preset modem router is already set up
with WPA2 and WPA security. NETGEAR recommends that you set up wireless security for
each guest network that you plan to use. For information about changing these settings, see
the following sections.