Filter
Top Products
Wireless Settings
34
N300 Wireless ADSL2+ Modem Router DGN2200v3
Consider Every Device on Your Network
Before you begin, check the following:
• Every wire
less computer has to be able to obtain an IP address by DHCP from the
modem router as described in Use Standard TCP/IP Properties for DHCP on
page 18.
• Each co
mputer or wireless adapter in your network must have the same SSID and
wireless mode (bandwidth/data rate) as the modem router. Check that the wireless
adapter on each computer can support the mode and security option you want to use.
• The
security option on each wireless device in the network must match the modem router.
For example, if you select a security option that requires a passphrase, be sure to use
same passphrase for each wireless computer in the network.
View or Change Wireless Settings
Your preset modem router comes set up with a unique wireless network name (SSID) and
network password. This information is printed on the label for your modem router. You view or
change these settings in the Wireless Settings screen. You can also use this screen to set up
guest wireless networks.
To view or change wireless settings:
1. Select Setup > W
ireless Settings to display the following screen.
2. Make any changes that are needed, and click Apply when done to save your settings.