Filter
Top Products
GS108T Smart Switch Software Administration Manual
6-14 Monitoring, Maintenance, and Help
v1.0, December 2007
– Warning. Specifies that warnings, notifications, informational messages, and debug
messages are logged.
– Notice. Specifies that notifications, informational messages, and debug messages are
logged.
– Information. Specifies that informational messages and debug messages are logged.
– Debug. Specifies that debug messages only are logged.
3. Perform one of the following actions:
To add a remote log server:
a. Enter the server IP address.
b. Enter a UDP port.
c. Select a facility from the drop-down list.
d. Enter a description.
e. Select the minimum severity level from the drop-down list.
f. Click Add.
To delete a remote log server:
a. Select the check box to the left of the ID for the remote log server address that you want to
remove.
b. Click Delete.
To change the configuration for a remote log server:
a. Select the check box to the left of the ID for the remote log server address that you want to
change.
b. Change the fields.
c. Click Apply.