Filter
Top Products
GS108T Smart Switch Software Administration Manual
5-14 Configuring QoS and Security
v1.0, December 2007
The following figure displays the right side of the Advanced Port Authentication screen:
2. You can make changes to the port authentication setting for an individual port, for a group of
ports, or for all ports simultaneously:
• To change the port authentication settings for an individual port, select the check box to
the left of its port number, and then select the global settings.
• To change the port authentication settings for a group of ports, select the check boxes to
the left of their port numbers, and then select the global settings.
• To change the port authentication settings for all ports simultaneously, select the check
box at the top of the column of check boxes, and then select the global settings.
The following fields are displayed. Except for the Port, User Name, Authentication State, and
Termination Cause, all fields are configurable:
• Port. Shows an interface on which port-based authentication is enabled.
• User Name. Shows the supplicant user name.
Figure 5-10
Note: You can also enter the interface number (that is, the port number) in the GO
TO INTERFACE field, and then click GO.