Filter
Top Products
GS108T Smart Switch Software Administration Manual
Getting Started with Switch Management 1-3
v1.0, December 2007
For a more detailed discussion of the Smart Wizard Discovery utility, continue with the following
section,
“Network with a DHCP Server,” or “Network without a DHCP Server” on page 1-4. For a
detailed discussion of the Web browser interface, see Chapter 2, “Introduction to the Web Browser
Interface.”
Network with a DHCP Server
To install the switch in a network with a DHCP server:
1. Connect the GS108T Smart Switch to a DHCP network.
2. Power on the switch by connecting its AC-DC power adapter.
3. Install the Smart Wizard Discovery utility on your computer.
4. Start the Smart Wizard Discovery utility.
5. Click Discover for the Smart Wizard Discovery utility to find your GS108T Gigabit Smart
Switch. You should see a screen similar to the following one.
.
Figure 1-1