Filter
Top Products
GS108T Smart Switch Software Administration Manual
Managing System Settings 3-15
v1.0, December 2007
Advanced—Neighbors Information
When there are local LLDP neighbors, you can view the remote information in the Neighbors
Information screen:
Select System > LLDP > Advanced > Neighbors Information. A screen similar to the following
displays.
.
Under Neighbors Information, the following information is displayed:
• MSAP Entry. Shows the MSAP identifier from which the LLDPPU was transmitted.
• Local Port. Shows the local port on which the LLDPDU was received.
Power Value Shows the total power in watts required by a PD device from a PSE device, or the total
power a PSE device is capable of sourcing over a maximum-length cable based on its
current configuration.
Network
Policies
Network policy is associated with multiple sets of application types supported on a given
port.
• Application Type. Integer value indicating the primary function of the applications
defined for this network policy, advertised by an endpoint or network connectivity
device.
• Unknown Policy. Shows that an endpoint device wants to explicitly advertise that this
policy is required by the device but is currently unknown.
• Tagged. Shows whether the specified application type is using a tagged or an
untagged VLAN.
• VLAN ID. Contains the VLAN identifier (VID) for the port.
• L2 Priority. Shows the Layer 2 priority to be used for the specified application type.
• DSCP. Contains the DSCP value to be used to provide Diffserv node behavior for the
specified application type.
Figure 3-9
Table 3-5. MED Set Details (continued)
Item Description