Filter
Top Products
GS108T Smart Switch Software Administration Manual
Configuring Switching 4-15
v1.0, December 2007
b. To assign a port to or remove it from the VLAN, select the check box under an individual
port number.
5. Click Apply to confirm any settings changes.
Advanced—Port PVID Configuration
The Port PVID Configuration screen lets you assign a port VLAN ID (PVID) to an interface.
There are certain requirements for a PVID:
• All ports must have a defined PVID.
• If no other value is specified, the default VLAN PVID is used.
• If you want to change the port’s default PVID, you must first create a VLAN group that
includes the port.
Figure 4-12
Note: When the port-based VLAN type is configured, an ingress (incoming) packet with
an IEEE 802.1Q tag is ignored and preserved.