Filter
Top Products
GS108T Smart Switch Software Administration Manual
Configuring QoS and Security 5-13
v1.0, December 2007
– Disable. Specifies that port authentication is disabled for the port. No authentication
process is required for the port; traffic can be forwarded normally. This is the default
value.
– Enable. Specifies that port authentication is enabled for the port. The port must be
authorized by a RADIUS server to forward traffic. No traffic is forwarded if the port is
unauthorized.
5. Click Apply to confirm any settings changes to the port authentication settings.
Advanced—802.1x Configuration
The Advanced 802.1x Configuration screen is identical to the Basic 802.1x Configuration screen.
See the previous section.
Advanced—Port Authentication
The Advanced Port Authentication screen lets you configure global settings for port-based
authentication:
1. Select Security > Port Authentication > Advanced > Port Authentication. A screen similar to
the following displays. (Because the online screen is very wide, it is divided in a left screen
and right screen in this manual.)
The following figure displays the left side of the Advanced Port Authentication screen:
Figure 5-9