Filter
Top Products
GS108T Smart Switch Software Administration Manual
5-4 Configuring QoS and Security
v1.0, December 2007
• Egress Rate. Specifies the rate limitation of outgoing traffic in this port. The possible
values in bps are:
– 512K bps, 2M bps, 4M bbps, 10M bps, 20M bps, 40M bps, 60M bps, 100M bps,
200M
bps, 400M bps, and 1000M bps.
3. Click Apply to confirm any settings changes.
Advanced—801.1p to Queue Mapping
The 802.1p to Queue Mapping screen lets you map priority values to the four hardware traffic
queues:
1. Select QoS > CoS > Advanced > 801.1p to Queue Mapping. A screen similar to the following
displays.
2. Assign a hardware priority queue to each 802.1p priority tag (p0 to p7). The possible values
are for the Queue field are Lowest, Low, Normal, and High.
3. Click Apply to confirm any settings changes.
Advanced—DSCP Priority Mapping
The DSCP Priority Mapping screen lets you assign priorities to DSCP values:
1. Select QoS > CoS > Advanced > DSCP Priority Mapping. A screen similar to the following
displays.
Figure 5-3