Filter
Top Products
GS108T Smart Switch Software Administration Manual
Configuring Switching 4-23
v1.0, December 2007
To delete a static multicast ID:
a. Select the check box to the left of the static multicast ID that you want to remove.
b. Click Delete.
To change a Layer 2 multicast address:
a. Select the VID of the static multicast ID that you want to change.
b. Enter the new Layer 2 multicast address.
c. Click Apply.
Multicast Group Membership
To configure members for a multicast group:
1. Select Switching > Multicast > Multicast Group Membership. A screen similar to the
following displays.
2. From the ID drop-down list, select the static multicast ID that represents the multicast group
that you want to view or modify. When you make your selection, the VID field and Multicast
Entry fields change automatically.
You can either assign all ports to or remove them from the static group in step 3, or assign
individual ports to or remove them from the static multicast group in step 4. These steps are
mutually exclusive.
3. To assign all ports to or remove them from the static multicast group, select the check box to
the left of Unit
1.
4. To assign individual ports to or remove them from the static multicast group:
a. Click Unit 1. A screen similar to the following displays.
Figure 4-19