Filter
Top Products
GS108T Smart Switch Software Administration Manual
Configuring Switching 4-13
v1.0, December 2007
2. From the VLAN Identifier drop-down list, select the number that represents the VLAN you
want to view or modify.
You can either assign the same tag setting to or remove it from all ports in the VLAN in step 3,
or assign a tag setting to or remove it from each individual port in the VLAN in step 4. These
steps are mutually exclusive.
3. To assign the same tag setting to or remove it from all ports in the VLAN, toggle the check box
to the left of Unit
1. The tag setting determines if packets that are transmitted from each port
are tagged with the VLAN ID and other information. The possible tag settings are:
– T. Specifies that the egress (outgoing) packet is tagged for all ports.
– U. Specifies that the egress packet is untagged for all ports.
– Empty. Specifies that none of the ports are part of the VLAN.
4. To assign a tag setting to or remove it from an individual port in the VLAN:
a. Click Unit 1. A screen similar to the following displays.
Figure 4-9
Figure 4-10