Filter
Top Products
GS108T Smart Switch Software Administration Manual
4-14 Configuring Switching
v1.0, December 2007
b. Assign a tag setting to or remove it from a port by toggling the check box under an
individual port number. The tag settings determine if packets that are transmitted from the
port are tagged with the VLAN ID and other information. The possible tag settings are:
– T. Specifies that the egress packet is tagged for the port.
– U. Specifies that the egress packet is untagged for the port.
– Empty. Specifies that the port is not part of the VLAN.
5. Click Apply to confirm any settings changes.
Port-Based VLAN Membership
To configure VLAN membership for port-based VLANs:
1. Select Switching > VLAN > Advanced > VLAN Membership. A screen similar to the
following displays.
.
2. From the VLAN Identifier drop-down list, select the number that represents the VLAN you
want to view or modify.
You can either assign all ports to or remove them from the VLAN in step 3, or assign
individual ports to or remove them from the VLAN in step 4. These steps are mutually
exclusive.
3. To assign all ports to or remove them from the VLAN, select the check box to the left of
Unit
1.
4. To assign individual ports to or remove them from the VLAN:
a. Click Unit 1. A screen similar to the following displays.
Figure 4-11